Wooden House Models

Wooden House Models and Wooden House Techniques

Wooden houses, which are among the traditional buildings, are produced with many different techniques, and wooden house models differ according to their state and production style. While wooden house models offer comfort, aesthetics and health to the user together, they also provide you with a more economical accommodation area.

Although wooden houses are produced in our country, the materials used in wooden structures are imported, which causes an increase in wooden house prices. But in the long run, the benefits of wooden structures will be many times greater than other structures.

You can contact us for wooden house models, wooden house projects, wooden house prices or you can ask us your questions through our social media channels.

Wooden house models with system differences…

Wooden Frame Houses

In wooden frame structures, the carrier system is wood. The wood carcass skeleton is prepared in the computer environment as a result of the static calculation of many wood materials and is created by passing engineering controls in the factories.

The wooden frame house foundation is laid in accordance with the conditions of the land conditions. carcass structure; It is placed on a masonry or concrete foundation with a height of at least 0.50-0.60 m from the ground. It is very important to calculate the foundation well and make it solid on sloping lands. Land exploration and analysis must be done before preparing the wood carcass skeleton.

In wooden frame structures, the floor height should be at most 2.90 meters.

The skeletal system of wood carcasses is very suitable for heat and sound insulation. Insulation materials are easily placed between the skeletal gaps and all electrical and water installations used in the building pass through these gaps. For this reason, wooden frame structures are highly preferred.

Stone Filled Wood Carcass

In this system, the gaps in the carcass skeleton are filled with filler stones. In order for the structure to be strong and durable, the gaps between the filled stone material should be minimized. Appropriately sized stones, lime or cement are placed in the cavities of the wooden carcass skeleton from the bottom up, on top of each other. In ancient times, if lime and cement were not available, this process was done with mud. Although it is very rare, there are still places where this system is used. This method, known as Hımış, is among the preferred methods with its aesthetic appearance and durability. In stone filled structures, plaster wire should be covered on the wall surface, the plaster wire coating holds the wooden skeleton well and prevents it from cracking and falling out.

Brick-Filled Wooden Frame structures, which are built with the same logic as stone-filled structures, are made using bricks instead of stones. Brick, which is a lighter material, is preferred because it is easier and faster to build. Lifestyle, regional conditions and economic conditions have a great role in the technique of living spaces. For example; In areas where stone and brick are difficult to supply, adobe was used as filling material. Although healthy, durable and aesthetic structures are built in a very fast time with the developing technology, this comfort has been achieved by developing the techniques of these building systems, which were built under difficult conditions.

  Baghdadi Buildings

Baghdadi structures; It is a system in which the skeletal gaps of the wooden carcass structure are built by knitting with laths on both sides and plastering on it.

Wood Coated Carcass Structure

In this system, carcass skeleton; It is made according to the lengths of the boards to be placed in the strut gaps. The structure is nailed horizontally by starting from the bottom, overlapping the edges of the covering boards on the other board. The planks, which are nailed in this way, do not damage the structure by allowing the rain to drain down.

Plank Houses

Wooden structures produced using natural materials provide us with a healthy living space. The most important factor that determines the material to be used in wooden house construction is the most common and easily obtained building material in the region.

In our country, in the Black Sea region, where the forest area is the most dense, timber houses are seen quite intensely. In these regions, wooden houses are called oil lamps or pickets.

This system, which does not comply with the forest law building regulations, is among the prohibited structures. Plank houses are built with the use of wood material in an inappropriate size and system and are completely traditional structures.

Block houses, which are also one of the structures found in the Black Sea region, are among the prohibited structures, such as timber houses. block structures; They are built by arranging the bark-peeled round-trunked trees horizontally on top of each other.

  Block Houses

Block houses, which are also one of the structures found in the Black Sea region, are built by arranging the bark-peeled round-trunked trees horizontally on top of each other. In this system, more trees are used than necessary, so it is a structure that is seen as harmful and not preferred in terms of forestry.